APlusLift HW-10KOH-A 10000LB Two Post Overhead Clear Floor Car Lift/Industry Leading 3 Year Warranty

Industry-leading 3-YEAR WARRANTY

Combo (symmetrical and asymmetrical) Arm Assembly with Adjustable Screw Pads!

CE Certified Lift Structure and Hydraulic System – Tested for 115% Dynamic Load Capacity and 150% Static Load Capacity

One Set of 4″ Tall Truck Adapters Included; 6’9″ Lift Height Maximum with Truck Adapters

All Robot Welded Structure with Durable Powder Coated Finish

APlusLift HW-10KOH-A car lift (auto hoist) is one of the most affordable overhead car lifts built with quality materials and good workmanship. The lift has a strong double “S” column design to support 10,000 LB capacity. We also have an 10000LB overhead car lift with a single-point release.
We are proud to offer an industry-leading 3-year warranty for all parts (a $499 value)! We have available for our lifts. We welcome suggestions to improve our products and service!
Free shipping to the lower 48 states with forklift (or similar) on-site, or free pickup at nearby terminal. Car lifts require an on-site forklift We strongly recommend against renting a forklift; expenses are not reimbursed. See the shipping policy below for limited access/remote/high-cost areas.

Specifications

Model
HW-10KOH-A
(This Model)
AP-10SR
(for Comparison)

Manual
HW-10 KOH- A manual
AP-10SR Manual

Style
Overhead
Overhead

Lock Release
Double Point Release
Single Point Release

Warranty
3 Years (36 months)
3 Years (36 months)

Lifting Capacity
10,000 LB
10,000 LB

Overall Height
143 3/16″
143 3/16″

Overall Width
134 5/16″
134 5/16″

Maximum Lift height with Truck Adapters
81″
81″

Maximum Lift height without Truck Adapters
75″
75″

Maximum lift height from bottom of the arm to the ground
71″
71″

Minimum Height of Adjustable Pads from Ground
4″
4″

Drive Through Width (Carriage to Carriage)
100″
100″

Column to Column Width
109″
109″

Column Cross Section
11″L x 7″W
11″L x 7″W

Driving Mode
Dual hydraulic cylinders, chain drive
Dual hydraulic cylinders, chain drive

Motor
220V Single Phase 3HP 10A (recommend a 30A breaker)
220V Single Phase 3HP 10A (recommend a 30A breaker)

Hydraulic Oil
3-5 gallons AW32/AW46 (not included)
3-5 gallons AW32/AW46 (not included)

Time to full rise
50 seconds
50 seconds

Shipping Weight
1470 LB
1400 LB and 120 LB

Shipping package size
113″L x 22″W x 40″ H

113″L x 22″W x 40″H (Car Lift)
38″L x 17″W x 14″ H (2 ft Height Extension Crate)

Concrete Requirement

6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below)

Parts Included

4 pieces of adjustable screw pads
4 pieces of 4″ tall truck adapters (height extensions)
10 anchor bolts
10 shims
2 tool trays
2 toe guards

Arm Assembly

Combo (symmetrical and asymmetrical) Arm Assembly

Front Arms

Straight Front 3 Stage reach from 22 7/8″ to 42 5/8″

Back Arms

Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″

Column Steel Thickness

13/64″

Carriage Steel Thickness

15/64″

Carriage Yoke Thickness

9/16″

Arm Steel Thickness

15/64″

Base Plate Steel Thickness

5/8″

Model
HW-10KOH-A
(This Model)

Features

CE Certified Lift Structure and Hydraulic System
Third-party tested with a dynamic load capacity of 115%
Third-party tested with a static load capacity of 150%
Durable hydraulic system
Easy to operate and maintain

Double-point safety lock release
Double seal rings protecting PU material
Carriage material Q355 (ASTM A572), stronger than normal Q235 steel
Lifting operation by pressing the “UP” button on the motor
Manual lowering operation by pressing the lever
Relief valve built-in power pump to prevent overloading
Automatic arm lock restraints
Relief valve built-in power pump to prevent overloading
Door guard protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
Ultra-high molecular self-lubricating nylon slider that ensures carriage smooth moving up and down